Health and Happiness : Our Fundamental Rights®

Infant Radiant Warmer
Infant Radiant Warmer

Product Description

TRACK is innovatively designed to meet Thermoregulatory requirements of newborn infants who suffer extreme of heat loss. This unit can be used in Delivery rooms and NICU along with Baby Trolley / Bassinet / Cradles etc., Microprocessor based Temperature controller system provided to control the baby body temperature and it has all Fault Indications with visual alarms.



Salient Features:
- The controller is based on Micro computerized system.
- Large bright displays are easy to monitor and for
  viewing from a distance.
- Double digital display system provided to measure the
- Infant temperature and to set the required temperature.
- Feather touch keys provided for easy operation.
- LED system provided to indicate the heater output.
- Manual control system provided.
    • Fault Indications with alarm for
    • Baby probe failure.
    • 1°C temperature high.
    • 1°C temperature low.
    • High temperature cut‐off.
    • Power failure.

 

Physical Parameters:
• Thickness : 25mm
• Weight Approx : 35Kg
• Dimension : 700x430mm (LxW)
• Working level from ground : 900mm
• Baby tray is tilt angle on either side : +/‐8° max
• Castors : 50 mm with 2 brake wheels and 2 non ‐ brake wheels

 

Recommended Environmental Specifications:
• Operating temperature range : 20 °C to 33 ° C
• Storage temperature range : -25 ° C to 60 ° C
• Operating humidity range : 0 - 100% RH

 

Baby Probe:
Baby probe is made of highly sensitive sensor and is
interchangeable, field calibration taken care of by
software the probe is made up of silicon sheathed cable,
which allows easy cleaning.

 

Skin Temperature Probe:
• Range : 28°C to 38°C
• Accuracy : +/-0.2°C within range
• Resolution : 0.1° C
• Probe interchangeability : +/-0.2°C (Servo)
• Heater output controllable from 0 to 100% in Manual
mode (continuously variable)


Observation Lamp:
A halogen based observation light focus on any area
on the bed.

 

 

 

Heater:
Single element CE approved ceramic heater placed in
a parabolic reflector.                                                                        

 

Electrical Specifications:
• Electrical Supply : 230 V ± 10%, 50 Hz
• Power consumption with Heater at max. Output : 650W

 

Other Facilities:
• IV stand provided
• Monitor tray provided
• Provision of Oxygen cylinder
• Partition Tray