Health and Happiness : Our Fundamental Rights®

Microwave Based Hospital Waste Disinfection System
Microwave Based Hospital Waste Disinfection System

Product Description

Society for Applied Microwave Electronics and Engineering Research  working as autonomous R&D institution under Ministry of Electronics and Information Technology ; Developed indigenous technology, known as Microwave based Disinfection System for hospital waste disposal. Among the various methods recommended for disposal of infectious waste viz. Incineration, autoclaving, Microwave, deep burial; Microwave offers many advantages. Microwave heating is a molecular phenomenon. Microwaves heat the desired material directly without heating the surrounding structure. Microwave energy penetrates and heats the entire material at nearly same rate. Thus the heating is more uniform throughout the material and not entirely dependent on thermal conductivity of the material. Because of this Microwave heating can do a job faster. Further, after a predetermined heating cycle is over, infectious waste is converted into normal municipal waste, which can be disposed off along with other waste. 


Microwave method is zero polluting and no contaminated water is discharged in the process and does not cause hazards to environment. No Need of pressurised vessel as in Autoclave giving rise to high risk of operation. Does not produce odour and steam which is again much friendly to environment. MicroDS performs a fully automatic PLC controlled process. And hence does not require highly skilled operator. MicroDS does not require consumables. Very low maintenance required compared to Autoclaving.
 

Salient Features PLC based Operations Automatic Water Addition. Interlock and alarm generation for II Load operation. Report is printed for quantity of waste disinfected in respective cycle. Safety door interlock.On line temperature display and printing. Reduction in waste volume Compact and environment friendly.Non-infectious end product.No chemicals to treat/ store/discard.
 

Specification Outer Body -Aesthetically configured body of coated steel. Inner Chamber -Specially designed rectangular chamber made of stainless steel. Turn Table -Precisely balanced, slow-speed turn table with concealed drive mechanism and fool coverage and disinfection. Waste Container -Microwave proof specially moulded container to hold medical waste. Exhaust System -Specially designed noiseless system for the main chamber. Automatic Moistening System -Internally installed moisturization mechanism to facilitate uniformity of heat dissipation and transfer. PLC Systems -Programmable Logic Control system to ensure totally automatic disinfection cycle with safety interlocks and LCD display arrangements. Temperature Recorder - Online temperature display along with recording system to measure disinfection performance.
 



Technical Specification

Model No.: TDS10

Rated Capacity Throughput: 10 lit/hr.

Microwave Generator :  HF Output: 1.00 KW

Frequency: 2450 MHz

Input Voltage: 230 Volts,50Hz

Current: 10 Amp max.

Dimensions : 1040x1050x630mm (HxWxD)

Weight : 200kgs.(approx.)

Microwave Based Hospital Waste Disinfection System

Product Description

Society for Applied Microwave Electronics and Engineering Research  working as autonomous R&D institution under Ministry of Electronics and Information Technology ; Developed indigenous technology, known as Microwave based Disinfection System for hospital waste disposal. Among the various methods recommended for disposal of infectious waste viz. Incineration, autoclaving, Microwave, deep burial; Microwave offers many advantages. Microwave heating is a molecular phenomenon. Microwaves heat the desired material directly without heating the surrounding structure. Microwave energy penetrates and heats the entire material at nearly same rate. Thus the heating is more uniform throughout the material and not entirely dependent on thermal conductivity of the material. Because of this Microwave heating can do a job faster. Further, after a predetermined heating cycle is over, infectious waste is converted into normal municipal waste, which can be disposed off along with other waste. 


Microwave method is zero polluting and no contaminated water is discharged in the process and does not cause hazards to environment. No Need of pressurised vessel as in Autoclave giving rise to high risk of operation. Does not produce odour and steam which is again much friendly to environment. MicroDS performs a fully automatic PLC controlled process. And hence does not require highly skilled operator. MicroDS does not require consumables. Very low maintenance required compared to Autoclaving.


Salient Features• PLC based Operations Automatic Water Addition.• Interlock and alarm generation for II "Load" operation.• Report is printed for quantity of waste disinfected in respective cycle.• Safety door interlock.• On line temperature display and printing.• Reduction in waste volume.• Compact and environment friendly.• Non-infectious end product.• No chemicals to treat/ store/discard.


Specification• Outer Body -Aesthetically configured body of coated steel.• Inner Chamber -Specially designed rectangular chamber made of stainless steel.• Turn Table -Precisely balanced, slow-speed turn table with concealed drive mechanism and fool coverage and disinfection.• Waste Container -Microwave proof specially moulded container to hold medical waste.• Exhaust System -Specially designed noiseless system for the main chamber.• Automatic Moistening System -Internally installed moisturization mechanism to facilitate uniformity of heat dissipation and transfer.• PLC Systems -Programmable Logic Control system to ensure totally automatic disinfection cycle with safety interlocks and LCD display arrangements.• Temperature Recorder - Online temperature display along with recording system to measure disinfection performance.



Model No. TDS30

Rated Capacity Throughput: 30 lit/hr.

Microwave Generator :HF Output: 1.50 KW

Frequency: 2450 MHz

Input Voltage: 230 Volts,50Hz

Current: 15 Amp max.

Dimensions : 1540x1040x630mm³ (HxWxD)

Weight : 250kgs.(approx.)

Microwave Based Hospital Waste Disinfection System

Product Description

Society for Applied Microwave Electronics and Engineering Research  working as autonomous R&D institution under Ministry of Electronics and Information Technology ; Developed indigenous technology, known as Microwave based Disinfection System for hospital waste disposal. Among the various methods recommended for disposal of infectious waste viz. Incineration, autoclaving, Microwave, deep burial; Microwave offers many advantages. Microwave heating is a molecular phenomenon. Microwaves heat the desired material directly without heating the surrounding structure. Microwave energy penetrates and heats the entire material at nearly same rate. Thus the heating is more uniform throughout the material and not entirely dependent on thermal conductivity of the material. Because of this Microwave heating can do a job faster. Further, after a predetermined heating cycle is over, infectious waste is converted into normal municipal waste, which can be disposed off along with other waste. 


Microwave method is zero polluting and no contaminated water is discharged in the process and does not cause hazards to environment. No Need of pressurised vessel as in Autoclave giving rise to high risk of operation. Does not produce odour and steam which is again much friendly to environment. MicroDS performs a fully automatic PLC controlled process. And hence does not require highly skilled operator. MicroDS does not require consumables. Very low maintenance required compared to Autoclaving.


Salient Features• PLC based Operations Automatic Water Addition.• Interlock and alarm generation for II "Load" operation.• Report is printed for quantity of waste disinfected in respective cycle.• Safety door interlock.• On line temperature display and printing.• Reduction in waste volume.• Compact and environment friendly.• Non-infectious end product.• No chemicals to treat/ store/discard.


Specification• Outer Body -Aesthetically configured body of coated steel.• Inner Chamber -Specially designed rectangular chamber made of stainless steel.• Turn Table -Precisely balanced, slow-speed turn table with concealed drive mechanism and fool coverage and disinfection.• Waste Container -Microwave proof specially moulded container to hold medical waste.• Exhaust System -Specially designed noiseless system for the main chamber.• Automatic Moistening System -Internally installed moisturization mechanism to facilitate uniformity of heat dissipation and transfer.• PLC Systems -Programmable Logic Control system to ensure totally automatic disinfection cycle with safety interlocks and LCD display arrangements.• Temperature Recorder - Online temperature display along with recording system to measure disinfection performance.



Model No. TDS60

Rated Capacity Throughput: 60 lit/hr.

Microwave Generator :

HF Output: 3.00 KW

Frequency: 2450 MHz

Input Voltage: 230 Volts,50Hz

Current: 20 Amp max.

Dimensions : 1700x1050x630mm³ (HxWxD)

Weight : 300kgs.(approx.)